Touring 1996-2016

Forsch Performance Angry Slip-On Muffler set for Harley-Davidson Touring models. Featuring large 4-inch 16 Gage mufflers finished with race-inspired CNC machined billet end caps, the 400 Series Mk1 is tuned to give your bagger or trike  deep and aggressive roar. Allow 2-3 days build time for in stock items. 

• Modular design for swappable baffles and endcaps
• Angry baffle & endcap options)
• Military-Spec Hard Black Anodized or Nickel-Chrome Endcaps
• Sleek Weld-Free mounting system
• Utilize stock header pipe clamps (size: 1.75" & RH)
• Harley Touring 88ci to 110ci +  Trike 2010 - 2026 (Twin Cam and M8 trike)

Forsch Performance MK1 Slip-On mufflers for Harley-Davidson Touring models Feature large 4-inch mufflers finished with race-inspired CNC machined 4.5" billet end caps, the MK1 is tuned to give your (1996-2016) bagger a deep and aggressive roar. Our 4.5" end caps increase the exhaust scavenging area resulting in a unique sound curve and a slight overall sound reduction* compared to our standard 4.0" end caps.  All Forsch pipes are internally coated with a heat and corrosion resistant ceramic coating to help protect the beautiful chrome or ceramic exterior finish 

• removable/swapable endcaps and baffle tubes for custom tuning (see quiet or Angry baffle & endcap options)
• Semi-Gloss Black, Chrome, or Flat Black Billet Endcaps (choose one)
• Sleek Weld-Free mounting system
• Utilize stock header pipe clamps (size: 1.75" LH, 1.75" RH)
• Harley Touring 88ci to 110ci

*To reach our "standard sound level" with 4.5" end caps, Angry™ baffles can be added to achieve a similar noise level. Note: This will not provide an exact sound match.

1 Set of 2 pieces,

Fitment : Forsch Mufflers 1998-2016 HD Touring 

(specify Level I, II*, III*, IV*, V* with order)       * Angry II, III, IV& V require an SE or Aftermarket Tuner Angry 1 & 2 do not unless other modifications have been made to your motorcycle such as intake and CAT

1996-2016 Forsch Mufflers Touring  - Developed to Enhance the v-twin sound and aggression as much as possible without detriment to engine.

Disclaimer:  A stock engine tuner is sufficient for normal everyday street use, if the only engine/intake/fuel system modification you have done is your Forsch Mufflers! However an Engine Tuner is recommended (along with high flow intake) to fully appreciate these pipes, and if any other modifications have been made. Please note as with a stock / modified engine/exhaust,  Damage wear & tear may occur faster than normal by practicing aggressive riding such as applying instant full throttle at low RPM's! - read the HD manual - they don't like it when riders crank the throttle in a higher gear at low RPM vs gearing down and increasing, increasing RPM and reducing engine loads - if you pound it it all the time it will break, if you find you are always on the throttle - it could be time for Cams, Compression Increase, Bore kit etc.  

Fits all 4.0" Forsch pipes, These CNC Machined Billet Aluminum 6061 T6 Endcaps enhance the look of your ride with a sleek bolt-free endcap mounting system, FORSCH PERFORMANCE laser engraved logo.

Includes Hardware Kit (10 pcs 1/4-20 x 1-1/2" 316 SS Socket Head Cap Screws)

Oversized just right @ 4.2" these fit all 4.0" Forsch pipes, CNC Machined Billet Aluminum 6061 T6 Endcaps enhance the look of your ride with a sleek hidden  bolt endcap mounting system (common with all Forsch 4" mounting) "FORSCH PERFORMANCE" laser engraved logo, and 10 tuner ports for the enthusiast looking for a unique sound with excellent deep thundering base 

Includes 2 endcaps &  Hardware Kit (6 pcs 1/4-20 x 1-1/2" 316 SS Socket Head Cap Screws)

Oversized just right @ 4.2" these fit all 4.0" Forsch pipes, CNC Machined Billet Aluminum 6061 T6 Endcaps enhance the look of your ride with a sleek hidden  bolt endcap mounting system (common with all Forsch 4" mounting) "FORSCH PERFORMANCE" laser engraved logo, and 4 tuner ports for the enthusiast looking for a unique sound with excellent deep thundering base 

Includes 2 endcaps &  Hardware Kit (6 pcs 1/4-20 x 1-1/2" 316 SS Socket Head Cap Screws, washers & loctite) allow 3-4 days extra for Skulls Laser Engraving (made to order)

Fits all 4.0" Forsch pipes - Flush / clean mounting - no outside bolts

Includes Hardware Kit

Forsch Performance Slip-On for Harley-Davidson exhaust for Touring models and Trikes, Road Glide Three offers high-quality features for motorcycle enthusiasts. This includes large 4-inch mufflers with race-inspired CNC machined billet oversized 4.2" end caps, as well as Forsch's Angry 2.0 x 2.5" dual  Stepped Baffle Core for a deep and aggressive roar without requiring an aftermarket tuner in most cases. The modular design allows for swappable baffles and end caps, with options such as Standard, Quiet, and Angry baffles. These Slip-Ons are built with Angry Baffles and ceramic or 3-step chrome billet endcaps, and are mounted using a sleek, weld-free system utilizing stock header pipe clamps. These Slip-Ons are compatible with several Harley Touring models, including Twin Cam & Evo from 1998-2016 88-103ci + engine fitment. and Trike 2010 - 2026 (Twin Cam and M8 trike)